Engee documentation

Thrustmaster HOTAS Warthog Support Package

Support Package Thrustmaster HOTAS Warthog provides Engee operation with a joystick and a Throttle block through library blocks Joystick and throttle control unit. The package runs on top of the subsystem Engee.Integrations and provides access to the axes and buttons of the devices.

Requirements

  • The Engee subsystem is installed and running.Integration.

  • The joystick and the control panel are connected via USB and are correctly identified by the operating system as HID devices.

  • (Optional, Windows) The manufacturer’s software/drivers for calibration are installed.

Quick start

  1. Install or connect the Engee subsystem.Integrations as shown in article.

  2. Connect Thrustmaster HOTAS Warthog to your computer and make sure that both devices (Throttle, Joystick) are recognized by the system.

    • Windows: Check in the Device Manager and (if necessary) calibrate in the manufacturer’s software.

    • Linux/macOS: Check that the devices are visible as HID joysticks.

  3. Now you can use blocks from the library. Joystick and throttle control unit.