Engee documentation

TCP/IP support Package

The TCP/IP support package enables Engee to work with TCP connections over Ethernet using library blocks TCP. The package runs on top of the subsystem Engee.Integrations and allows you to establish connections (client/server) and exchange data.

Requirements

  • The Engee subsystem is installed and running.Integration.

  • The IP addresses and ports for connections are known (specified in the block parameters).

Before usage, it is necessary to configure the IP addresses for the network ports of the equipment, for example, as shown for the "RITM" KPM in the section Machine settings.

Quick start

  1. Install or connect the Engee subsystem.Integrations as shown in article.

  2. Configure the IP addresses of the hardware’s network ports (see Machine settings for example).

  3. Specify the local/remote IP and port (and, if necessary, the client/server role) in the blocks TCP.

  4. Now you can use blocks from the library TCP.