Engee documentation

targetTwoRayPaths

Calculation of signal propagation parameters using a two-beam model.

Library

EngeeRadars

Syntax

Function call

  • paths = targetTwoRayPaths(mountingloc,targets,fc) — calculates the parameters of signal propagation using a two-beam model (direct beam and reflection from the earth’s surface). Unlike the free space model, the function returns 4 paths for each target: straight-straight, straight-reflected, reflected-straight, reflected-reflected. For each target, path lengths, propagation losses, reflection coefficients are calculated taking into account the ESR of the real target and its mirror image, departure and arrival angles, as well as the Doppler shift.

Arguments

Input arguments

# mountingloc — antenna position

+ vector

Details

The coordinates of the antenna location in meters in the platform coordinate system, set as a real column vector [x, y, z].

Типы данных

Float64

# targets — vector of goals

+ vector

Details

A vector of targets already existing in the radar scenario. Each goal must contain the following fields:

  • Position — real-row vector of length 3, in meters;

  • Velocity — a real-valued row vector of length 3, in m/s;

  • Orientation — quaternion or rotation matrix of size 3 on 3;

  • Signatures — a signature object or a tuple of signature objects, for example EngeeRadars.rcsSignature.

Типы данных

struct

# fc — carrier frequency

+ scalar

Details

The carrier frequency of the signal in Hz, given as a positive scalar. It is used to calculate the wavelength, free space loss and Doppler shift.

Типы данных

Float64

Output arguments

# paths — vector of structures TwoRayPath
vector of structures

Details

Structures TwoRayPath for all purposes targets, returned as a vector. Unlike the free space model, 4 structures are formed for each target (according to the number of rays in the model). The total number of structures in the array is 4 * Ntargets, where Ntargets — number of targets. Each structure contains the following fields:

  • PathLength — the length of a specific beam (direct or reflected) in meters from the antenna to the target and back, given as a scalar.

  • PathLoss — signal propagation loss in dB for a particular beam, specified as a scalar.

  • ReflectionCoefficient — the reflection coefficient of the target for a particular beam, calculated on the basis of the ESR of a real target or its mirror image, given as a scalar in linear units (dimensionless value). For a direct beam and a beam with double reflection, the coefficient is positive, and for rays with a single reflection, it is negative (it takes into account the phase inversion during reflection). If the target signature is not an object EngeeRadars.rcsSignature, the reflection coefficient is assumed to be equal to 1.

  • AngleOfDeparture — the angles of sending the signal in degrees from the antenna to the target (or its mirror image) for a particular beam, specified as a real column vector of length 2 in the format [azimuth; seat angle].

  • AngleOfArrival — the angles of arrival of the reflected signal in degrees from the target (or its image) to the sensor for a particular beam, specified as a real column vector of length 2 in the format [azimuth; seat angle].

  • DopplerShift — the Doppler frequency shift in Hz caused by the radial velocity of the target relative to the antenna, given as a scalar. In this model, the Doppler shift is assumed to be the same for all four beams of the same target.

Типы данных

struct