Barrage Jammer
A source of obstructive interference.
Ports
Output
#
port_1
—
description missing
Details
Description missing
| Data types |
Description missing |
| Complex numbers support |
Description missing |
Input
#
Ref
—
number of samples per frame
scalar
Details
Number of samples per frame.
Dependencies
To use this port, set the Source of number of samples per frame parameters to Derive from reference input port.
| Data types |
|
| Complex numbers support |
No |
Parameters
Main
#
Effective radiated power (W) —
effective radiation power
Real number
Details
Specify the effective radiated power (ERP) of the interfering signal as a positive scalar. The unit of measurement is W.
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
#
Source of number of samples per frame —
source of number of samples per frame
Property | Derive from reference input port
Details
Specify the source of the number of samples per frame as Property or Derive from reference input port.
If Property is selected, the number of samples is specified in the Number of samples per frame parameters.
If Derive from reference input port is selected, the number of samples is set through the Ref input port.
| Values |
|
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
No |
#
Number of samples per frame —
number of samples per frame
Real number
Details
Specify the number of samples in the noise output signal as a positive integer. The number of samples must match the number of samples produced by the signal source.
For example, if the Rectangular Waveform block is used as a signal source and Samples is set in the Output signal format parameter, the value of the Number of samples per frame parameter must correspond to the value of the Number of samples in output parameter of the Rectangular Waveform block. If the Output signal format parameters are set to Pulses, then the value of the Number of samples per frame parameter must correspond to the product of Sample rate and Number of pulses in output divided by Pulse repetition frequency.
Dependencies
To use this parameter, set the Source of number of samples per frame parameter to Property.
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |