GP-AD-24 DAC-single
|
Page in progress. |
Setting values of one of the analogue outputs of the RITMeX GP-AD-24 I/O module.
Description
The block is used to set the value of one of the analogue outputs of the RITMeX GP-AD-24 I/O module.
Parameters
Module number -
unique module identification
1 (by default) | 2 | 3 | 4 | 5 | 6 | 7 | 8
Details
Used when more than one I/O module of the same type is installed in a real-time machine.
The module numbers are signed on the case of the CPM "RITM".
Output type -
setting the type of analogue outputs of the module
Voltage (by default) | Current 0-20 mA | Current 4-20 mA
Channel number -
Setting the number of the engaged analogue output of the module
1 (By default) | 2 | `3 | `4 | `5 | `6 | `7 | `8 | `9 | `10 | `11 | `12 | `13 | `14 | `15 ` | `16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32
Details
| The contacts are connected according to the diagram in the article Purpose of GP-AD-24 pins. |
Calculation Step -
calculation step in seconds for sending samples to the DAC from the real-time application
`-1 (By default).