SV TX
Formation of SV frames according to the IEC 61850-9-2LE standard.
blockType: SubSystem
|
Path in the library: |
Description
Block SV TX It is used to generate SV frames from a set of fields according to IEC61850-9-2LE for further transmission over Ethernet. The outputs of the SV transmitter unit must be connected to the inputs of the unit RITM-ETH-RAW TX.
Entrance
# Currents — values of currents
+
a vector of 4 elements
Details
Input current values.
| Data types |
|
| Support for complex numbers |
None |
# Quality of Currents — values of the quality parameter for currents
+
a vector of 4 elements
Details
Input values of the quality parameter for currents. This signal is supplied from the unit SV Quality.
| Data types |
|
| Support for complex numbers |
None |
# Voltages — voltage values
+
a vector of 4 elements
Details
Input voltage values.
| Data types |
|
| Support for complex numbers |
None |
# Quality of volts — values of the quality parameter for voltages
+
a vector of 4 elements
Details
Input values of the quality parameter for voltages. This signal is supplied from the unit SV Quality.
| Data types |
|
| Support for complex numbers |
None |
# confRev — version of the configuration revision
+
scalar
Details
The revision version of the configuration. Acceptable value from 0 before 4294967295.
# smpSynch — sync status
+
scalar
Details
Synchronization status. Acceptable value from 0 before 255.
# Source MAC — The MAC address of the source
+
a vector of 6 elements
Details
The value of the source MAC address as a vector of 6 bytes.
Dependencies
To use this port, check the box Enable MAC addresses inputs.
| Data types |
|
| Support for complex numbers |
None |
# Destination MAC — The MAC address of the receiver
+
a vector of 6 elements
Details
The value of the receiver’s MAC address as a vector of 6 bytes.
Dependencies
To use this port, check the box Enable MAC addresses inputs.
| Data types |
|
| Support for complex numbers |
None |
Exit
# Size — the size of the data
+
scalar
Details
The size of the SV packet as the number of bytes to be transmitted. The size must not exceed the value of the parameter. Максимальный размер сообщения: the block RITM-ETH-RAW TX.
| Data types |
|
| Support for complex numbers |
None |
# Data — data
+
vector
Details
The generated SV packet is in the form of a set of bytes.
| Data types |
|
| Support for complex numbers |
None |
Parameters
MAC addresses
# Enable MAC addresses inputs — MAC address external connection option
Details
If this option is selected, the MAC address can be set via the block ports Source MAC and Destination MAC.
If this option is unchecked, the MAC address is set in the parameters Source MAC address and Destination MAC address.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
# Source MAC address — MAC address of the SV stream transmission source
Details
The MAC address of the SV stream transmission source in the form of a vector of 6 bytes.
Dependencies
To use this option, uncheck the box. Enable MAC addresses inputs.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
# Destination MAC address — MAC address of the SV stream receiver
Details
The MAC address of the receiver of the SV stream transmission in the form of a vector of 6 bytes. For Multicast distribution, MAC addresses are assigned to streams in the range 01:0C:CD:04:00:00-01:0C:CD:04:01:FF.
Dependencies
To use this option, uncheck the box. Enable MAC addresses inputs.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
SV
# APPID — the value of the message identification tag
Details
The value of the message’s identification tag. The standard provides a range of 0x4000-0x7FFF.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
# svID — full name of the AMU
Details
The full name of the AMU.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
VLAN
# Enable VLAN — VLAN field generation option
Details
The option of forming a VLAN field.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
# VLAN priority — traffic transmission priority tag
Details
The priority tag for traffic transmission. Acceptable value from 0 before 7.
Dependencies
To use this option, check the box Enable VLAN.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
# VLAN ID (VID) — ID of the virtual network
Details
ID of the virtual network that the stream belongs to (12 bits). Acceptable value from 0 before 4095.
Dependencies
To use this option, check the box Enable VLAN.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |
Sample time
# Sample time, s — calculation step
Details
The calculation step is in seconds.
| Default value |
|
| Program usage name |
|
| Evaluatable |
Yes |