Engee documentation

Environment Parameters

Environmental parameters for all connected SPICE units.

environment parameters

Description

The Environment Parameters block allows you to set parameters that apply to all SPICE-compliant units in the electrical network:

  • Circuit Temperature.

  • Minimum conductivity.

If your model does not contain an Environment Parameters block, all blocks use these parameter values by default. To override the values by default, connect each network in the system to the Environment Parameters box.

The simple semiconductor models in the Semiconductors sub-library are temperature independent, so the Environment Parameters block only changes the minimum conductivity parameter used by the exponential diode and bipolar transistor models.

Ports

Conserving

# OUT — electrical port for setting environmental parameters
electricity

Details

A non-directional port associated with specified environmental parameters.

Program usage name

pin

Parameters

SPICE

# Temperature — SPICE block temperature
K | degC | degF | degR | deltaK | deltadegC | deltadegF | deltadegR

Details

The temperature of the connected SPICE-compatible units.

Values

K | degC | degF | degR | deltaK | deltadegC | deltadegF | deltadegR

Default value

300.15 K

Program usage name

temperature

Evaluatable

Yes

# GMIN — internal conductivity
S | mS | nS | uS | 1/Ohm

Details

Internal conductivity for the respective connected SPICE-compatible units.

Values

S | mS | nS | uS | 1/Ohm

Default value

1e-12 1/Ohm

Program usage name

g_min

Evaluatable

Yes