Engee documentation

BA-IS-XX UART-Setup

Page in progress.

UART configuration with usage of the RITMeX BA-IS-XX I/O module.

uart setup ru

Description

The block is used to configure the UART with usage of the RITMeX BA-IS-XX I/O module.

Parameters

Module number - unique module identification
1 (by default) | 2 | 3 | 4 | 5 | 6 | 7 | 8

Details

Used to uniquely identify a module when more than one I/O module of the same type is installed in a real-time machine.

Module numbers are signed on the housing of the RITM.

Channel number - UART channel to be configured
1 (By default) | 2` | 3` | 4` | 5` | 6` | 7` | 8` | 9` | 10` | 11` | 12` | 13` | 14` | 15`` | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32

*♪ Speed transceiver speed
1200 (By default) | 2400` | 4800` | 9600` | 19200` | 28800` | 38400` | 57600` | 115200` | 230400` | 460800` | 921600`

Data bits - number of transceiver data bits
8 (by default)7 6 5 ``

*Stop bits number of transceiver stop bits
single (by default) | `double'.

*`Evenness'' method of determining transmitting errors
`No (By default)
| Even | Odd