4th Order Point Mass Forces (Longitudinal)
Calculation of forces for the model of planar translational motion of a material point.
Description
The 4th Order Point Mass Forces (Longitudinal) block calculates the projections of the forces acting on the material point on the axes of the trajectory coordinate system, which are used in the model of planar translational motion of the material point.
The projections of forces are calculated using the formulas:
The 4th Order Point Mass Forces (Longitudinal) unit operates in SI units.
|
The block uses coordinate systems according to the international standard ISO 1151. |
Ports
Input
Lift - lifting force
scalar
Lift force, N.
Data types: Float64.
Drag - drag force
scalar
Drag force, N.
Data types: Float64.
Weight - gravity
scalar
Force of gravity, N.
Data types: Float64.
Thrust - thrust force
scalar
Traction force, N.
Data types: Float64.
γ - angle of inclination of the trajectory
scalar
Trajectory inclination angle, rad.
Data types: Float64.
μ - velocity roll angle
scalar
Velocity roll angle, rad.
Data types: Float64.
α - angle of attack
scalar
Angle of attack, rad.
Data types: Float64.
Output
Fx - projection of the applied force on the OXk axis
scalar
Projection of the applied force on the axis of the trajectory coordinate system, N.
Data types: Float64.
Fz - projection of the applied force on the OZk axis
scalar
Projection of the applied force on the axis of the trajectory coordinate system, N.
Data types: Float64.