Engee documentation

Potentiometer (CE)

A controlled potentiometer.

blockType: SubSystem

Path in the library:

/RF/Circuit Envelope/Junctions/Potentiometer (CE)

Description

Block Potentiometer (CE) simulates a variable resistor. The block uses a signal Engee as an input control signal for changing the resistance between the positive and negative terminals.

The equations below describe the voltage-ampere characteristics of a potentiometer when the control signal changes in the range from 0 before 1, for the following parameter values Potentiometer type::

  • Linear:

  • Logarithmic:

  • Antilog:

where

  • — control signal Engee;

  • — minimum resistance of the potentiometer;

  • — the maximum resistance of the potentiometer.

Ports

Input

# Ctl — control signal
scalar

Details

Control signal Engee, set as a scalar.

Data types

Float64

Complex numbers support

No

Conserving

# + — electrical port
electricity

Details

The electrical RF port corresponding to the positive terminal of the potentiometer.

Program usage name

+

# − — electrical port
electricity

Details

The RF electrical port corresponding to the negative terminal of the potentiometer.

Program usage name

−

Parameters

Parameters

# Percentage of resistance at half wiper: — percentage of resistance at the half stroke of the slider

Details

The percentage of resistance at the half stroke of the slider for logarithmic potentiometers, set as a positive scalar. Acceptable values range from 0 before 50.

Dependencies

To use this parameter, set for the parameter Potentiometer type: meaning Logarithmic.

Default value

20.0

Program usage name

percent_log

Tunable

No

Evaluatable

Yes

# Percentage of resistance at half wiper: — percentage of resistance at the half stroke of the slider

Details

The percentage of resistance at half stroke of the slider for anti-logarithmic potentiometers, set as a positive scalar. Acceptable values range from 50 before 100.

Dependencies

To use this parameter, set for the parameter Potentiometer type: meaning Antilog.

Default value

80.0

Program usage name

percent_antilog

Tunable

No

Evaluatable

Yes

# Minimum resistance, Ohm — minimum input resistance of the potentiometer

Details

The minimum input resistance of the potentiometer, set as a positive scalar in ohms.

Default value

10.0

Program usage name

R_on

Tunable

No

Evaluatable

Yes

# Maximum resistance, Ohm — maximum input resistance of the potentiometer

Details

The maximum input resistance of the potentiometer, set as a positive scalar in ohms. This value must be greater than the parameter value. Minimum resistance, Ohm.

Default value

1.0e6

Program usage name

R_off

Tunable

No

Evaluatable

Yes

# Potentiometer type: — type of potentiometer curve
Linear | Logarithmic | Antilog

Details

The type of electrical characteristic of the potentiometer, specified as Linear, Logarithmic or Antilog.

Values

Linear | Logarithmic | Antilog

Default value

Linear

Program usage name

type

Tunable

No

Evaluatable

Yes