LCARD L502 ADC
Receiving samples from the ADC channels of the L-Card L-502 I/O module.
blockType: EngeeFunction
|
Path in the library: |
Description
| To work with the block, install/update the support package. equipment. |
Block LCARD L502 ADC It is used to receive samples from the ADC channels of the L-Card L-502 I/O module.
ADC Characteristics:
-
Number of channels: 32 in common ground mode and 16 in differential mode.
-
Bit depth: 16 bits.
-
Measuring ranges: ±10 V, ±5 V, ±2 V, ±1 V, ±0.5 V, ±0.2 V.
-
Conversion frequency: 2 MHz.
Ports
Output
#
adc
—
an array of samples from the I/O module ADC
vector
Details
The size of the array corresponds to the "Number of channels" parameter in the block (from 1 to 16 in differential mode or from 1 to 32 in common ground mode).
| Data types |
|
| Complex numbers support |
No |
Parameters
Параметры
# Номер модуля: — the string serial identifier of the L-Card L-502 module
Details
You can get it on the front of the board or using the Engee hardware support package. For more information, see L-CARD L-502.
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
#
Количество каналов: —
number of ADC channels for output
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32
Details
| Values |
|
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
#
Диапазон: —
selecting the measurement range of the ADC
±10 В | ±5 В | ±2 В | ±1 В | ±0,5 В | ±0,2 В
Details
| Values |
|
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
#
Режим: —
selecting the ADC mode
32 канала: режим с общей землей | 16 каналов: дифференциальный режим
Details
| Values |
|
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
# Шаг расчёта, с: — calculation step in seconds for receiving samples from the ADC
Details
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |