LCARD L502 DO
Sending values to the digital outputs of the L-Card L-502 I/O module.
blockType: EngeeFunction
|
Path in the library: |
Description
| To work with the block, install/update the support package. equipment. |
Block LCARD L502 DO It is used to send values to the digital outputs of the L-Card L-502 I/O module.
Characteristics of digital outputs:
-
Number of channels: 16.
-
Voltage range: 0…+0.4 V ("zero"), +2.4…+3.3 V ("one").
-
Output frequency: 1 MHz.
Ports
Input
#
do
—
an array of samples for transmission to digital outputs
vector
Details
The size of the array corresponds to the parameter "Number of channels" in the block (from 1 to 16).
| Data types |
|
| Complex numbers support |
No |
Parameters
Параметры
# Номер модуля: — the string serial identifier of the L-Card L-502 module
Details
You can get it on the front of the board or using the Engee hardware support package. For more information, see L-CARD L-502.
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
#
Количество каналов: —
number of digital channels for output
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16
Details
| Values |
|
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |
# Шаг расчёта, с: — calculation step in seconds for transmitting the samples to the digital outputs
Details
| Default value |
|
| Program usage name |
|
| Tunable |
No |
| Evaluatable |
Yes |