LCARD L502 SIN

Generation of a high-frequency sinusoidal signal at the analog outputs of the L-Card L-502 I/O module.

blockType: EngeeFunction

Path in the library:

/Interfaces/LCARD/LCARD L502 SIN

Description

To work with the block, install/update the support package. equipment.

Block LCARD L502 SIN It is used to generate a high-frequency sinusoidal signal at the analog outputs of the L-Card L-502 I/O module.

# The amplitude, In — signal amplitude
scalar

Details

Data types	`Float64`
Complex numbers support	No

# Frequency, Hz — signal frequency
scalar

Details

Data types	`Float64`
Complex numbers support	No

# Phase, with — the initial phase of the signal
scalar

Details

Data types	`Float64`
Complex numbers support	No

# Offset, In — the displacement of the sinusoidal signal along the value axis
scalar

Details

The sum of the amplitude and offset should not exceed 5 V or be less than -5 V.

Data types	`Float64`
Complex numbers support	No

# Номер модуля: — the string serial identifier of the L-Card L-502 module

Details

You can get it on the front of the board or using the Engee hardware support package. For more information, see L-CARD L-502.

# Номер канала: — number of DAC channels for input
1 | 2

Details

# Амплитуда, В: — initial amplitude during signal initialization

Details

# Частота, Гц: — the initial frequency of the signal

Details

# Фаза, с: — the initial phase of the signal

Details

# Смещение, В: — the initial offset of the sinusoidal signal along the value axis

Details

The sum of the amplitude and offset should not exceed 5 V or be less than -5 V.

# Шаг расчёта, с: — calculation step in seconds for generating a sinusoidal signal

Details