RF9 SDR Platform Management Module

The blocks presented in the BA-IS-XX RF9 library are designed to control the RF9 SDR platform on RITM Here are the blocks for configuring the basic SDR parameters; heterodyne control; generation of quadrature signals at the carrier frequency; obtaining spectra and controlling the physical characteristics of radio frequency channels and their calibration.

BA-IS-XX RF9-DOUBLE-DDS: Reproduction of a quadrature two-tone signal by an internal DDS generator on an SDR transmitter.
BA-IS-XX RF9-PRODUCE-ARBITRARY: Playback of a quadrature arbitrary signal on an SDR transmitter.
BA-IS-XX RF9-PRODUCE-HARMONIC: Playback of a quadrature N-tone harmonic signal on an SDR transmitter.
BA-IS-XX RF9-PRODUCE-LFM: Reproduction of a quadrature linear frequency modulation signal on an SDR transmitter.
BA-IS-XX RF9-REF-FREQ: SDR carrier frequency control.
BA-IS-XX RF9-SETUP: Setting the basic parameters of the RF9 SDR platform of the BA-IS-XX module at RITM
BA-IS-XX RF9-SINGLE-DDS: Reproduction of a quadrature monochrome signal by an internal DDS generator on an SDR transmitter.
BA-IS-XX RF9-SPECTRUM: Receiving the spectrum on an SDR receiver.
BA-IS-XX RF9-SPECTRUM-ANALYZER: Obtaining the dominant harmonics of the spectrum on an SDR receiver.