BA-IS-XX RF9-SETUP

Setting the basic parameters of the RF9 SDR platform of the BA-IS-XX module at RITM

blockType: CFunction

Path in the library:

/RITM/RITMeX BA-IS-XX/BA-IS-XX RF9/BA-IS-XX RF9-SETUP

Description

To work with the block, install/update the support package RITM blocks.

Block BA-IS-XX RF9-SETUP It is used to configure the basic parameters of the RF9 SDR platform of the BA-IS-XX module on RITM

Ports

None.

Parameters

# Номер модуля: — serial number of the BA-IS-XX module
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8

Details

Serial number of the BA-IS-XX module on the RHYTHM chassis (only BA-IS-XX modules are counted in the numbering).

Values	`1` \| `2` \| `3` \| `4` \| `5` \| `6` \| `7` \| `8`
Default value	`1`
Program usage name	`m_module_idx`
Tunable	No
Evaluatable	Yes

# Нижняя граница гетеродина, МГц: — the minimum possible value of the heterodyne for tuning during the execution of the model on the rhythm

Details

Default value	`300.0`
Program usage name	`m_low_ref_freq`
Tunable	No
Evaluatable	Yes

# Верхняя граница гетеродина, МГц: — The maximum possible value of the heterodyne for tuning during the execution of the model on the rhythm

Details

Default value	`5500.0`
Program usage name	`m_high_ref_freq`
Tunable	No
Evaluatable	Yes

# Начальное значение гетеродина, МГц: — the initial value of the heterodyne

Details

Default value	`300.0`
Program usage name	`m_initial_ref_freq`
Tunable	No
Evaluatable	Yes

# Использовать DUT/DMA для передатчика — switch of the transmitter modes

Details

Switch of the transmitter modes:

0 — DUT/DMA is not used for the transmitter, the platform operates in the internal DDS generator mode.;
1 — DUT/DMA is used for the transmitter, the specific mode is determined by the following parameter.

Default value	`false (switched off)`
Program usage name	`m_dut_dma`
Tunable	No
Evaluatable	Yes

# Максимальное количество сэмплов DMA передатчика (0 для использования DUT): — The amount of memory that is allocated for reproducing the specified waveforms during the execution of the rhythm model.

Details

The parameter defines the size of the memory that is allocated for reproducing the specified waveforms during the execution of the rhythm model in DMA mode using the blocks BA-IS-XX RF9-PRODUCE-LFM, BA-IS-XX RF9-PRODUCE-HARMONIC, BA-IS-XX RF9-PRODUCE-ARBITRATION; to use the DUT mode (custom HDL model), you must set 0.

Default value	`0`
Program usage name	`m_dma_samples`
Tunable	No
Evaluatable	Yes

# Шаг расчёта, с: — block calculation step

Details

The block calculation step in seconds (-1 for inheriting the model calculation step).

Default value	`-1`
Program usage name	`m_sample_time`
Tunable	No
Evaluatable	Yes