Engee documentation

Variable Phase Shift (CE)

A model of a phase shifter with a variable phase shift.

blockType: SubSystem

Path in the library:

/RF/Circuit Envelope/Elements/Variable Phase Shift (CE)

Description

Block Variable Phase Shift (CE) controls the phase of the RF circuit output signal. The block uses a control signal to control the phase of the circuit. One input port is for the control signal, and the other is for the RF circuit signal.

Phase shifters are widely used in phased array antenna systems. In such systems, electronically controlled phase shifters provide scanning of the antenna beam in space. In addition, phase shifters are used in control and measuring systems.

Ports

Input

# Phase — control signal
scalar

Details

Control signal Engee, set as a scalar.

Data types

Float64

Complex numbers support

No

Conserving

# In+ — The input signal
electricity

Details

A positive electrical port connected to the input signal.

Program usage name

In+

# In− — The input signal
electricity

Details

The negative electrical port connected to the input signal.

Program usage name

In−

# Out+ — The output signal
electricity

Details

A positive electrical port connected to the output signal.

Program usage name

Out+

# Out− — The output signal
electricity

Details

The negative electrical port connected to the output signal.

Program usage name

Out−

Parameters

Parameters

# Phase shift unit — angle measurement units for circuit phase control
deg | rad

Details

Angle measurement units for controlling the phase of the signal, set as radians rad or degrees deg.

Values

deg | rad

Default value

deg

Program usage name

phase_shift_unit

Tunable

No

Evaluatable

Yes

# Reference impedances (Ohm) — characteristic impedance of the phase shifter

Details

The characteristic impedance of the phase shifter, given as a real positive scalar or vector of real positive numbers, in ohms.

If the characteristic impedance is different from 50 Om, the model inside the block Phase Shift (CE) it is reduced to a normalized value 50 Om.
Default value

50.0

Program usage name

Z0

Tunable

No

Evaluatable

Yes