Pin assignment CA-MA-45
Two SUB-D9 connectors of the plug (male) and socket (female) type are mounted directly on the board, corresponding to the first CAN channel.
If it is necessary to use the second CAN channel, the manufacturer installs an additional strip containing two SUB-D9 connectors of the plug (male) and socket (female) type corresponding to the second CAN channel.
The connector contacts are used as follows:
Contact |
Signal |
|---|---|
1 |
Not in use |
2 |
CAN_LOW |
3 |
CAN_GND |
4 |
Not in use |
5 |
Not in use |
6 |
CAN_GND |
7 |
CAN_HIGH |
8 |
Not in use |
9 |
Not in use |