Pin assignment CA-MA-55
Two male SUB-D9 connectors are mounted directly on the board, corresponding to the first and second CAN channels (CAN1 and CAN2 are signed).
The connector contacts are used as follows:
Contact |
Signal |
|---|---|
1 |
Not in use |
2 |
CAN_LOW |
3 |
CAN_GND |
4 |
Not in use |
5 |
Not in use |
6 |
CAN_GND |
7 |
CAN_HIGH |
8 |
Not in use |
9 |
Not in use |